Elevator Forum

Correct, FST picked, only picks up fast

TSL contact or broken shunt, UTS contact, FST Relay contact Last edited by Indirtwetrust; 11/06/17 01:11 AM.

Yes

Should just be the selector Micro. Pretty sure the newest version should work on all CLCs.

Clip leads on CLC from GND test point to + side of the lower left cap (same height as battery. Set for 5.1vdc there Last edited by Indirtwetrust; 1...

Yes it can, disconnect and try individually.

Last edited by Indirtwetrust; 10/30/17 11:55 PM.

First make sure your NP input is high (Variable 8, bit 2). Maybe lost P24G, F4 fuse blew? Also goes through the power supply toggle switch in COP L...

Give me please Configurator?

You did not mention door locks. HDS, UADS, LADS, RDS. I think there are LEDs for all 4.

Last edited by Indirtwetrust; 10/22/17 02:35 PM.

Make sure TDL, TSL, & UTS are low and DTS is high.

If you actually have a configurator and don't know how to use it, don't!

Not to say that isn't a problem, but if the car is stopping level like you said, how is the oil causing it to level up?