Notifications

Clear all

Technical Questions

This is where you can ask a technical question about any equipment you are working on.

RSS

Page 507 / 549 Prev Next

Armour Dynoglide

Last post by Pjf79, 4 weeks ago

Posts: 3

Oh,what a wonderful piece of $#!?.So,here goes.The...

By elevatedo... 14 years ago
I presume this is the Dynaglide 1, (Relay control ...

By Broke_She... 14 years ago
This is the old stuff,pre tms 500 or so.Alot of ic...

By elevatedo... 14 years ago

T III

Last post by Pjf79, 4 weeks ago

Posts: 25

So,I have this Dover T3 and it goes down every onc...

By elevatedo... 14 years ago
Uppo...Otis put in the Swift and renamed it for jo...

By Broke_She... 14 years ago
The ones I worked on that were on the Westinghouse...

By Smitty 14 years ago
Where is the smiley for banging my head on the wal...

By elevatedo... 14 years ago
view all posts

Adding Battery Lowering to old DMC

Last post by Pjf79, 4 weeks ago

Posts: 18

I'm adding a R&R battery lowering unit to an o...

By Administr... 14 years ago
I'll have to go back to the job to get the specifi...

By Administr... 14 years ago
I had another thought if DCL causes a problem. Par...

By Johnny 14 years ago
Johnny,Good call on the DCL signal! I was able to ...

By Administr... 14 years ago
view all posts

New guy needs help with DMC

Last post by Pjf79, 4 weeks ago

Posts: 11

Hey Guys, this is my first post here, seems like t...

By UPandDOWN 14 years ago
Scott is right you can find out why and repair the...

By danzeitz 14 years ago
So true...

By Broke_She... 14 years ago
IT is always nice to have more than one car in a g...

By Len 14 years ago
view all posts

Normic 1600

Last post by Pjf79, 4 weeks ago

Posts: 8

Getting questions from a couple of guys.#1 hand he...

By christyco... 14 years ago
Will an EZ scan tool work with a Normic? I have an...

By Johnny 14 years ago
Hey Johnny,Never heard back from them. Many thanks...

By christyco... 14 years ago
On a northern, you can use either a MAP tool or an...

By Johnny 14 years ago
view all posts

MCE M4000 stops in flight

Last post by Pjf79, 4 weeks ago

Posts: 6

No loss of safe circuit, nor door locks. Nothing i...

By Vic 14 years ago
MCE is going to send out a new SD card, to downloa...

By Vic 14 years ago
Originally Posted By: Vic MCE is going to send out...

By Broke_She... 14 years ago
Since the M2000 came out, we have had a few board ...

By Vic 14 years ago
view all posts

Tac50-04

Last post by Pjf79, 4 weeks ago

Posts: 3

What is b44 fault

By Rick 14 years ago
If your laptop says the elevator status is b44 Can...

By galaxy 14 years ago
I had the same thing on a Tac 22. Found a relay po...

By Elevatorf... 14 years ago

KONE Resolve

Last post by Pjf79, 4 weeks ago

Posts: 4

How is this equipment to work on? Any special tool...

By Jim 14 years ago
Jim, when you say "Resolve", are you referring to ...

By Vic 14 years ago
I just looked at one of these today for a bid. Thi...

By solidstat... 14 years ago
The Resolve is their mod package. There are two ty...

By SteveO 14 years ago

KONE EcoSpace Safety Test Procedure

Last post by Pjf79, 4 weeks ago

Posts: 1

Hello,My name is Nick and I'm looking for some hel...

By Nick 14 years ago

configure KONE F2K

Last post by Pjf79, 4 weeks ago

Posts: 1

Hello allWho knows how can we configure a KONE F2K...

By hmbx 14 years ago

Page 507 / 549 Prev Next

14 Forums
7,386 Topics
41 K Posts
114 Online
2,871 Members

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed