This board is the forum-side index of the site technical library. Full entries live in the library, where they are kept current and cross-linked with the relevant threads.

Controllers & Drives

• Reading a controller fault list without being misled — Fault codes report the last thing that went wrong, not the first. How to order the…
• Acceleration, jerk and levelling: engineering a ride that feels right — The three motion parameters that decide ride quality, how they interact with the machine and the…
• Hydraulic elevators: the faults that only appear when the oil is hot — Jack, pump, valve and oil temperature - how a hydraulic unit fails differently from a traction…
• Elevator drives and motors: geared, gearless, hydraulic and the faults each produces — Traction machine types, VVVF vs resistor control, encoder and brake subsystems, and the diagnostic clues that…
• Elevator control systems: generations, feedback and a troubleshooting order — Relay logic through microprocessor and destination dispatch, how position feedback works on each generation, and the…

Doors & Entrances

• Elevator door systems: why they cause most callbacks and how to fix them for good — Operator types, interlocks, gibs and rollers, reopening devices, and the alignment procedure that stops a door…

Fundamentals

• Counterweight, compensation and balance: why load matters to diagnosis — What the counterweight and compensation system do, how balance changes the symptom you see, and how…
• Suspension ropes and belts: inspection criteria, wear patterns and retirement — How to examine suspension means properly, what the wear patterns tell you about the machine and…
• Acceleration, jerk and levelling: engineering a ride that feels right — The three motion parameters that decide ride quality, how they interact with the machine and the…
• Escalators and moving walks: the components that generate the calls — Step chain, handrail, comb, brake and skirt - how an escalator differs from an elevator in…
• Elevator glossary: working definitions of the terms used in the trade — From A17.1 to worm gear: a plain-language glossary of elevator and escalator terms, including the words…
• Elevator system anatomy: what every part does and which ones fail — The traction machine, ropes, counterweight, car frame, safeties, governor, buffers, doors and controller explained as one…

Glossary

• Elevator glossary: working definitions of the terms used in the trade — From A17.1 to worm gear: a plain-language glossary of elevator and escalator terms, including the words…

Maintenance & Service

• Pit and hoistway examination: what to look at and in what order — A repeatable hoistway and pit inspection sequence - access, clearances, devices, housekeeping - with the findings…
• Suspension ropes and belts: inspection criteria, wear patterns and retirement — How to examine suspension means properly, what the wear patterns tell you about the machine and…
• Counterweight, compensation and balance: why load matters to diagnosis — What the counterweight and compensation system do, how balance changes the symptom you see, and how…
• Service safety practice: the habits that prevent the incidents — Lockout, car-top discipline, pit entry, rescue and the two-person rule - the working practices that decide…
• Acceptance and periodic tests: what is measured, and what proves it — The test sequence a new or altered unit must survive and the recurring tests an existing…
• Hydraulic elevators: the faults that only appear when the oil is hot — Jack, pump, valve and oil temperature - how a hydraulic unit fails differently from a traction…
• Machine-room-less (MRL) elevators: designing maintenance access before you need it — What MRL changes for service work - access, rescue, heat, and the spare-part strategy - and…
• Entrapment response: the procedure, the communication and the paperwork — What to do when people are in a stopped car - the sequence that keeps them…
• Building a maintenance program that survives the audit — A risk-based maintenance schedule: what to examine, how often, what to record, and how to structure…

Modernization

• Machine-room-less (MRL) elevators: designing maintenance access before you need it — What MRL changes for service work - access, rescue, heat, and the spare-part strategy - and…
• Modernization: deciding what to replace, keep and re-use — A decision framework for controller, machine, doors and car work - what each change actually buys,…

Safety & Codes

• Pit and hoistway examination: what to look at and in what order — A repeatable hoistway and pit inspection sequence - access, clearances, devices, housekeeping - with the findings…
• Service safety practice: the habits that prevent the incidents — Lockout, car-top discipline, pit entry, rescue and the two-person rule - the working practices that decide…
• Acceptance and periodic tests: what is measured, and what proves it — The test sequence a new or altered unit must survive and the recurring tests an existing…
• Entrapment response: the procedure, the communication and the paperwork — What to do when people are in a stopped car - the sequence that keeps them…
• Escalators and moving walks: the components that generate the calls — Step chain, handrail, comb, brake and skirt - how an escalator differs from an elevator in…
• The safety chain and governor: what protects the car and how to test it honestly — Overspeed detection, safety gear, slack rope devices, buffers and the pit switches - what each device…
• Which code clause applies? A practical map of ASME A17.1 and EN 81 — How the two main elevator safety codes are organised, which edition applies to an existing installation,…

Browse the full technical library →