Notifications
Clear all
Topic starter
25/08/2012 12:55 am
No loss of safe circuit, nor door locks. Nothing in the fault log.
Going back today, to see if it's losing position, or whatever. This is the second go-around with this issue. The first go-around, MCE said we needed new software, which was installed several months back.
Going back today, to see if it's losing position, or whatever. This is the second go-around with this issue. The first go-around, MCE said we needed new software, which was installed several months back.
25/08/2012 1:08 am
Im having a similar problem Did the whole software thing as well , and still having issues have some parts on order just waiting to go back aswell. The only fault im getting is loss of position feed back .
Topic starter
25/08/2012 1:47 am
Thanks for the input.
Do you have that skinny, magnetic-encoded selector tape? Looks like the elevator is reading an old 8-track audio tape!
Topic starter
25/08/2012 12:28 pm
MCE is going to send out a new SD card, to download a new software revision. Third version for us.
Somehow I get the feeling that this wouldn't be necessary if Majid and Javad were still at the helm.
26/08/2012 4:04 am
Originally Posted By: Vic
MCE is going to send out a new SD card, to download a new software revision. Third version for us.
Somehow I get the feeling that this wouldn't be necessary if Majid and Javad were still at the helm.
I hear ya....Quality control has seemed to suffer.
Topic starter
26/08/2012 5:10 am
Since the M2000 came out, we have had a few board failures on initial start-up. That never used to be the case with the PHC 1000, which we installed many hundreds of.
And there have been a few M2000 board failures during service, too.
Overall, I'd say they have more problems now than ever. Maybe they are making their boards in a sweatshop.
"Are all the jobs in your factory staffed by children?"
"No! Not the whips!"
Last edited by Vic; 08/25/12 09:11 PM.