Elevator Forum

Once download is complete, it should ask you for file name/ or where you want to store the file. Click on the download, and change it to the job addre...

100% agree. I have only seen 1 of these machines, and we were removing it so that the mod crew could install a new machine. Things allways break at th...

You guys are funny with all your typing and stuff. Lets all meet like Will Ferral in anchor man. We will all meet behind some old buildings, with all ...

Have you replaced your tape guides, and check your prox sensors. Make sure you haven't bent any pins on the plug on the tape reader board. Also check ...

Disregard this I was on vacation when you guys discussed this topic. So I have my answer. SORRY

I AGREE COMPLETELY!

UPDATE>>>>>>>The recall now works, and fire srv works if I turn it on from the controller, the key switches both go into a serial...

I had one that I put in a new selector board, still didn't work, So I put the old board back in, and it worked. Can't explain that...... but are you s...

Check your floor gongs, I had a DMC blow the fuse only when it came to the floor, and then started blowing fuses as soon as the disconnect was turned ...

Maybe, we just had a new one installed I will check it out maybe they learned from their mistakes. I wish I would do the same.

Smartrise has 24 volt door locks. Make sure you Clean them every month. I like everything when it runs.

OUCH!!!!!!!!!!!

update...........it was not a parameter change. 1-62 is set to 1 and 7-38 is 1. There is no voltage to the fire srv key switches I had to leave again....

Thanks Vatorman15 they were closed today I will try that on monday. I am afraid to ask the building engineer anything until its fixed. I would prefer ...