Elevator Forum

Cheak your Capacitor in line with the Resistors. It could be a open Resistor. Is this the one with a couple of solid boards labeled S1-S5 about chest ...

I have a 3stop freight, constant pressure, no car gates, water hydro, runs off of 9 relays total. No data plate, or manufacturer, GE 10,000 ohm coils....

Mce, Elevator Controls, Swift, Smartrise, Dmc, tac. I hate Dover composite, and old US traction, I figure them out when i have too. I like all cars wh...

????????????????

Try altering the accel/decel parameters.Also could be tacho issue as lift vibrates all up shaft!Infact id be quite confident to head towards tacho fir...

I agree if it is not clipping a lock, you have a magnet in the wrong position, or cheak to see if your top final is hitting before DZ . Can you run th...

P.S. check the data plate on the car it should give you FPM....

This is a home lift 50 fpm is the top speed, these were not designed for commercial use. E311 is right. The pump size, and pipe diameter limits the am...

So here is the update. The answer is cable tension, squaring the cab w/ the guides, and packing tightness. It runs perfect now. Thanks for the help......

Cat works for 2 days. It only vibrates on the left piston. Pistons are single stage. I will cheak the air. No vibration at high speed. It does vibrate...

its $1200.00 dollars, Thats right

Cheak your resistor d4 on the clc should be 3vdc on one side and 5vdc on the other. Your power supply should have 5.1vdc and the 12.5vdc. Cheak your p...