Elevator Forum

Douglas18 Send me a PM with an email, will send a pdf format set. Your sure it is a LRV3? There were several different versions, like LRS-3.

gs264 Why would you want a key for this 16bit IMS? Need 32bit IMS now. Last edited by Rolly; 12/17/15 04:57 PM.

Sorry, nothing in the attic.. ☹️

Will have to dig through some old stuff but there is a remote possibility something is in the attic. Reminds me of a story where a manager gave a mech...

Rodney is right on, and if it's a Lon you have some more work also.

Forget that dongle.. it is trash. Will blow a fuse on your Elevator. Be careful.

Those older controllers like that had a Big swing door that closed over the relays. The tag could have been on that swing door. Last edited by Roll...

Need Wiring Diagram number from controller Tag. Tag may be on door that covered controller.

If someone uploaded another jobs software into the unit the UIT may not work either.

PedroYou would do better to list the Part Numbers on the plug in end of each card for the 350 fpm Job. CPU rack and Drive Boards.

Any chance of a traction loss problem? Slow accel/deceleration rates and see if it stays running.

Most of those Boards have a 1uf Cap on them for Outputs. They do decay and fail and are critical. Have fixed many really strange problems by changing ...

There is a special bit set on the crypkey site key generator just for the Icon controller on both 16 bit ver 2.3xx or 32 bit ver 2.4xx. If it is ver 2...

The battery Otis is MRVF. Your all correct it is a POS. There were 400 Units in the USA and Otis spent 20 Million to make them run. I asked why not ju...

How did you check the AC on the Power Supply. That Supply is a 15 Volt voltage doubler circuit. Those 2 caps are super critical. Did you look at it wi...