Elevator Forum

I'd check in the clc at lcc7 1&2 and lcc11 8-11 for connections. I had a similar issue once after changing a power supply where the hall calls wou...

Try like an small 1/8 turn in on the up slowdown.

Consider yourself lucky, you have to run it on the recovery pump at 1 to 2 fpm till you can access the cartop and get behind the controller to the ups...

All my 32s fire the ups back on, what would you do for a mrl then?

I think pick then drop right away

I just had one in a failed constant state and replaced the module. This was 2013 i think,lol.

Brake module possibly?

I had one trapping people giving door lock faults. Turned out to be the hall lock board. Older version, do you have this?

Should work with 1.20 but some job won't connect?

Welcome. don't be afraid to ask questions,keep yourself busy, and work safe.

Is it overshooting the top floor and leveling back down?

Hw2&3 relays are known culprits and fst.

I've got bad things to say about pixel ( hate to go off topic) but I'm battling one right now the losses comm with the tape selectors from the p-toc d...

It's likely the board is bad right out of the box. It has happened to me a couple times.

Usually get a notice about 12 days out, and off the top of my head it might tell you in about IMS.