Elevator Forum

Unless you have really old IMS, it does work on Tac32. If you have an IMS version that installs black, blue, green, & red shortcuts, use the black...

ECI just refreshes them. But if you mod a car with a job specific FAST Tool they can unlock it too.

It happens sometimes. Manifests differently depending on what it changed to.

What is J16 set to? Should be 19

You need to use a meter to see why you aren’t getting P24 to the IN relay in the controller. We know you have it to the car top inspect switch, are yo...

But is IN picked or not? Really sounds like it’s on access or someone has lifted INB in the machine room.

I did have one recently that would not come off FEO. Pulled the battery with power off, re-entered parameters then did HW & door scans.

It’s out of the Green Drive manual. There should be one on the USB stick that came with the job

It’s a Remote Fast command

JRT

That’s a comm loss between the Inverter and the PEA inside the drive

I have tried and tried with every brand of converter and through VMs…. Please let me know if you figure it out but as far as I can tell, the ACPI driv...

... Attachments DMC-1 Pwer Supply.png (164.25 KB, 66 downloads)

Well, ya… the power supply is dual output. 5v to CLC and 12v to door and selector. 12v output should only be 10.75-11vdc.The 12v output in the power s...

PY2 and PY4 boards are interchangeable and it doesn’t matter what software is in them.