Elevator Forum

So,With an original post of June 13, I wonder what the outcome was for the OP. Maybe he's still analyzing the problem, maybe he called MCE and got it ...

Here's a good example of TKE technologies-

With car top inspection set to slow speed, stop on each set of magnets while pushing the selector head side to side. Don't be surprised if you see one...

"Flops and Bad designs" huh? Lemme see....For me...MRL's are bad design. I get the whole "usable space" thing and "Eco friendly" line, but unable to s...

Is there more than meets the eye here?

JYour tool is running you down some other path.FLT should return (in column form) the fault entry number, code, time, position, direction Maybe not on...

"Not reducing it enough". So you were getting some change, just not enough. I hate to say "new board".too soon, but....Is this a new job to you?I have...

OK OK, here's my guess;Only access works, (floor) not car top inspection (cabin roof, (won't switch INA/INSP ???)Now "scoreboard"? Indicator or P.I. s...

Google it. Plenty to read about E.COR controls. Just sounds like a new product. Yippieeee! Can't wait for it to make its way over here. Last edited...

The print I have shows just the one contact for I'm sure the telltale signal lamp on the controller.The print is for a traction car also. I'll snoop a...

The earliest print I have is 1971 and it just shows an inductor symbol, N.O., with the " up level sensor" etc. hand written over it, and the relay coi...

HOME_PARK_OPEN is a different setting than HR_PARK_OPEN. Check and see if this option is set. Or, if HOMING _ACTIVE is set, try turning it off. At the...

Do you have the RVU box? If so, set it up to capture the fault 10 or 9. If you can capture the fault, you'll see a lot of other information occurring ...

With the multiple symptoms described, I'd say Dirt hit it on the head...5volt supply.Those connectors are notorious for intermittent weired troubles. ...

If you're trying to do a scan, there must be a reason. Or, are you just trying to learn a bit more about this control?On the scan, at what point does ...