Elevator Forum

Does this car use vanes and transducer, or is it using a selector tape? I have had a similiar fault on a TAC 32 hydro. Magnet for floor was accurate f...

Greg HN is Hall Node. The TAC 50-04 and TAC 32 hydro both use individual hall nodes for each hall station. This was an upgrade from the TAC 50 and TAC...

Think the generic help for IMS is DHN. This should give you a bunch of cool commands to help you out, DHNF for display hall nodes front, DCN for displ...

You should look for a local elevator Union and ask them. Some of those older parts make very cool lawn ornaments. Many an elevator guy can be spotted ...

We always use weights, because "figuring it" and seeing it are totally different. Yes you can find your objective over pressure, but did you actually ...

L24's are just an expansion, no programming needed.

The old finder relays located on Thyssen TAC 20's....k7-12 would drop back contacts and give some really strange faults. Swap them blue dogs out for s...

PM'd, good luck bud, let me know how this works out please.

gs264 is on the same thought as I am. If you have time, and perhaps another hand onsite, you may want to even remove the platen bolts and do a manual ...

Hall board, you mean the card inside the gutter? HN board? If thats what you replaced PM me.

TxVet, you made the right call man, just relax. As I explained earlier, the union does not decide the actual hiring, the companies do. So the union re...

Sounds like the 104 is most bulletproof. You have a ton of options to help doors close in high winds that dont involve a harder to troubleshoot board,...

Typical crew size for new installation is 2 guys for an elevator. Timelines dictate,bigger jobs how many 2 man crews we may send out. Example 6 elevat...

OK fellas I have some free time, so I will give you some info, at least how local 19 works. First off you work for the union, you are employed by the ...

Wow, what a strange solution to the problem...good to know.