Elevator Forum

Let me know if you need anymore help.

Sanding sleeves work awesome for dings and pits. I left the last one on a running car for two weeks. Length I guess would depend on how bad the piston...

Always forget the older TIV was considered a TAC 50. The older gear can be a royal pain. My new stuff is pretty cake.

I have on the TAC 32, procedure is the same I believe. Dump the blahblahblah.cfg file and the version of software file into the update folder, plug th...

I am not very informed about escalators so help me out here, how is the speed determined? Is there an encoder in the motor? Or does it use some other ...

I think uppo is on to it. Some new equipment has zone preference as well. Does this happen at all floors, just the uppers, just the lowers, etc? Once ...

You wont be able to scale up your own personal tools. There is a set standard of the few you are personally allowed to own for a very good reason. Who...

When I got in we were allowed to have the 10-1, channel locks, and tape measure. Only tool I needed from the mechanic was the tweeker. Better check do...

First not all called will respond, some may have moved on, 10th outta 10 may suck, but you were at the test...10 outta 100 is pretty good, chin up bud...

I thought someone else used that nomenclature as well. DACH/Door AC Hot and DACC/Door AC Common.

I usually do set MAL back to 0, not so much to mess with anyone, but as to keep the menus clean and uncluttered. The only Parameter opened by MAL that...

You do not need mal set to 1 for the door hand, I already posted how to get into this. Service, door diagnostics, door smarfast. The first window that...

I know jp7-8 were both resistors on the old card. We remove them for CAN communication, they were left on for LON, so if the 50-03 is LON based they s...

Sounds like that tap may be on the wrong side? Very limited experience here, if you have time, mark the tap and make gross adjustments just to verify ...