Elevator Forum

[quote=Otis Redding]Check this tester outOh Well. Just when I was starting to feel sorry for Zammy's sad life

Send me your e-mail address. (Which monospace model are you interested in) ? Last edited by koneisland; 03/25/16 01:22 PM.

Originally Posted By: alvinharpo Tried the above but don't have a MAP Maintenance Access Panel

Originally Posted By: alvinharpo I have TMS600 locked up on Fire Service. Can anyone offer up some help Call lift from MAPGo inside lift and take t...

Just fit a generic autodialler system and save yourself lots of grief.

Unlikely to be a MRL if it is 34 storey high rise. Probably just brakes needing proper adjustment

Forget about 61N going dark, when bar reader is used you start set up drive with lift level at bottom floor.Remember to clear system before doing a ne...

Send me your e-mail address and I will give you info.

Hopefully it's just a parameter that's defaulted as John Jay says.If not you may also need a configuration key switch to configure COP and instruction...

Never a good idea to re-use oil at anytime and pretty dumb to re-use without at least filtering it first.

You do not need laptop. All you need is a LCEKNXPCB to access all parameters etc. You can buy them from Global Lift Spares or Ali Baba in China.

Sounds more like an external problem which has since been repaired by others e.g. incoming mains cables possibly, or underground cables shorted or wat...

Send me your e-mail address and I will send you info on these.

Check that 77U and 77N LED's are not both active.If both are active you will need to swipe one with bi-stable magnet to resolve issue. Last edited ...