Elevator Forum

As an owner of an 84 year old elevator, I would think you should welcome a 5 year test. From a user safety standpoint, do you not want to be assured y...

Ay-Caramba, Elevator Company's do like to be paid for services rendered. As do we all. However if there are safety violations and you as the owner fee...

these operators are affected by the weather if it is cold outside they are slow and you need to adjust the check, with the screw adjuster, conversely,...

Before doing a lot of problem solving, you may try replacing all the Belts. A lot of times this will take care of pulse count problems. Replace belts ...

Kone uses the Resolve 20 and Resolve 100 on Mods only. The 20 is fairly trouble free, especially when used in conjunction with Hollister Whitney. I ha...

if memory serves me, I believe whisper flex is from elsco.

Have you checked your EP input. The alt profile is used to let under-sized Backup Generators run the Elevators at a slower,lower speed and Amperage dr...

They are both good Machines.They both stand behind their equipment.I would not let the choice of either Machine affect the Bid.Instead choose the Comp...

You can try Canton Elevator, we used their products a lot. A very reliable source for anything hydraulic.

those might still be available from allen bradly. You need to pay attention to the contact arrangement. I think the delay on and delay off feature is ...

I had a dover cimmaron with the same problem. If you salve up the Pistons with the additive it will usually fix the problem for months. Of course the ...

an ME81 is excess motor rotation. If it happens,and the car was at or near floor level, it most likely occurs during current ramp down. the drive hold...

this may be a silly question, and I am sure you checked, but are you picking the brake in the down direction. Also if the commutator looks like a new ...

I think you still have a motor field problem. Have you Megged the Field Coils, and Brush rigging?

Just one more thought. Is it possible that the vane reader may not be hitting the holes correctly in the up direction, and tries a late slow down at t...