Elevator Forum

If the power drops enough to drop out that relay I’m sure the thing is coming to an emergency stop. With timer it’ll just take 5 more seconds to recov...

We were using TK part number 9739981 but any 2 pole relay controlled by a delay-on timer would work. Timer control powered from 230vac at LCEREC X3/2 ...

We have added delay-on timers to a lot of KCMs because of power issues both causing the RAM to be lost and damaging boards. Adding a 5 second delay in...

I sent you a PM but for parameters just EN-CRC has to be set correctly, usually 3 or 4 and set 326 high. You can set 326 to 01 0 or assign it an addre...

I think I can help you with this. Is it GCS or older GEN2?

I think I’d set up something to prove that the recall devices aren’t causing the problem. A data logger or a latching relay circuit on each of the ext...

They have no power on them in the open so the spirator and the weight of the door linkage will pull the door closed. The operator has to be adjusted s...

He sounds exactly like the “bad guy” in one of those safety training videos right before someone dies.

Thanks all for the help. I can’t believe this was so difficult. Feels like instead of getting it to work it had to be tricked into working. Hopefully ...

Okay this is what finally worked. Contact to X5/5 (EPD1) and X5/8 (OSS) so the car goes on EPD (4) then when it gets to the floor it changes to OSS (1...

Well Crap… Here now, with 1:87 set to 1 I get a constant 3401 fault. I thought the ResQpaq was all discrete like a Reynolds and Reynolds but this look...

The teach wire is only used to teach so it could be cut or come loose and everything works fine. Don’t find out until you try to do a new teach. On la...

No, try for tomorrow

This is what I was looking at v4.34. Probably the same but the description is sure better on the v4.44. Attachments Screenshot 2024-12-30 at 12.23....

When you do a DHNF does it show the version number of that HN card?Make sure the teach wire is getting from the last HN that teaches to the one that d...