Elevator Forum

I've never seen that nor do I have that symptom in my notes. Does the DSP green light flash normally?

PM= Private Message. Look up at the top of the page and you'll see My Stuff. Click on it. The MHC PCB on a MPHII has a battery, the MPHI doesn't have ...

All you need is a tool.

When I pulled those sleeves and washers out they were all oily and full of carbon.... They were burning like charcoal inside the arms conducting to gr...

My G3's are bad about grease coming out of the bearing carrier on the inside plate and getting up on the rigging and armature. I had to take and remov...

Sorry, I can't find them in my book. Last edited by E-man; 07/02/14 10:10 PM.

I've had to replace all of my sleeves and washers on my G3 machines. I didn't need studs so I didn't try to order any, I'll look for a number.

I've been lucky enough not to see a 3300 but I can assure you that from what I've heard, it's nothing close to a 400A or a 330A. All the codes, boards...

Totally agree, especially since the riding public's safety is involved... Originally Posted By: halfpick More the reason to go Non-proprietary....Or l...

All the companies have just about everyone's information. Some companies even seem to have more info than the original OEM....

Sounds like your rectifier is shorted on the RMH.

There are 2 plug connectors on the DCB (I'm assuming it's a DCB and not a TDC?). I'd plug each one in seperately and see if just one blows it and/or b...

What kind of equipment is it? Who installed it?

MAD?

I'd check all of your power supplies.