Elevator Forum

I've never heard of that fault. What kind of system, drive, is it?

The Resolve is their mod package. There are two types of systems, Resolve-20 and Resolve-100. The 20 is very similar to their hydraulic package, is ut...

Set menu 4, submenu 21 to "0". No need to cycle power

This is the company that bought Kimball. They might be able to help. O'Keefe Elevator

On a hydraulic the slowdown and floor switches are in the bar reader.Run the car past the slowdown switches and watch the LCEDRV connector XC1:1 pin 7...

If you look inside of the box on top of the car there are two boards.....more than likely. One has the travelers connected to it. This is called a ccb...

What exctly are you looking for? Straight-line, error codes, user interface menu.......how they stack rails? Their books are rather large and generall...

I forgot something.....What motor is it?

Need a little more info. Will it run on inspection from the controller? What kind of drive is it? Do you know how to clear the error log? I suggest cl...

It's been a long time since I've seen one but I think instead of changing both A and B channel polarities you just need to change the B channel. I'm n...

Is the PI a seven-segment or a dot matrix? It could be a CE product. Need a little more information.

I need to know how fast the car runs in order to set the slowdown magnets the correct distance from the floor. The distance is different between Maxto...

If the problem persists let us know. I've seen and fixed this before.

You will more than likely see an 82 error before the 15. The version 1 is somewhat temperature tempermental. Relays 443:1, 443:2 or 486 did not activa...

Is the adon board a version 1 or version 2? The version one has see-thru relays across the top of it, version 2 has white relays. What are the other e...