Elevator Forum

Give your information and the type of drive.

Can't say that I've ever seen one slip traction. The machine will stall. What type of unit is it? EcoSpace or MonoSpace? Type of drive?

Originally Posted By: Elev^te79 5-9-0 then power down will take the e-brake switch out completely if I'm understanding you correctly ? No it won't. ...

Jump XS1 pin 2 to 3 on the LCEDRV board, this overrides the directional limit. It's been a few years since I've seen one of these but you might have t...

You have to disable the ebrake from being held open. There are different ways depending on the type of mx machine you are testing.Originally Posted By...

Being an adjuster for Montgomery and Kone for 26 years I can tell you this, the 21 fault is a safety string error. The 65 error is that K442 on the AD...

I'm wondering if this thread was originated by an office manager trying to cut cost? 😆 Last edited by SteveO; 08/09/13 01:29 AM.

Sounds to me like the ADON board is crapping out. Is the ADON a version 1 or 2? Version 1 board has clear reaalys across the top. Version 2 has ones t...

I found the book I was needing. I had buried it long ago.

Originally Posted By: samikaesh Helloo I need to ask about Parameters table for Kone V3F16L and about LCEKNX BOARD INSTALLATIONcan anyone tell me how ...

Sounds like you might have an intermittent problem on a switch or the alignment of the switch to the accuating device might be off. The speed of the c...

There are only certain parameters that are set for the 16L, they are set according to the car's capacity. I have some of the information. If I knew wh...

Don't know what valve you have but it may have come into the top floor too fast. Make the transition faster, run another floor table. Put the transiti...