Elevator Forum

How do you control the car from the cab rope, constant pressure or is there another controller that isnt shown? Who is the manufacturer?

Yeah thanks for the info, really good info thanks a bunch. Havent had any calls since I found those two bad relays OLR and DZ. Also changed the switch...

I found the power supply to be a little low 4.98. I installed a new power supply and set it to 5.2. Found a brake issue BK2 and BK3 did not pick. I sw...

another job where they have a cable taped to the travling cable that comes off after a few years and gets caught up on everything.

Are they AC geared machines? One of our garages in my complex has the original fuji equiptment in it. Tons of ice cube relays, no relevels very hard s...

Forget paying a company to take care of the phone line and then paying a huge amount of money everytime the intercom goes out (we dont cover intercoms...

I can see this sceniro happening, Im not walking back up the machine room to get that jumper it will time itself out.

Originally Posted By: Broke_Sheave And the most common one that is against ANSI code, but is done on a regular basis. Removal of the prints from the j...

You have to have a tech let you in the pit. You sign a indemnity agreement before you are let in. If yours elevator runs with a limited amount of call...

Its either F18 or F23 on the drive. And 18 faults on my IMS. The problem happened 3 times in 5 days. Its been running fault free for the last 3 weeks....

Im not sure how Canada codes work but here in states there is a tag on the controller to what ASME code to inspect too. Who do you have a maintenance ...

Yeah it has a handheld pet in the controller but it asks for a password and I have no clue what it is. Is there a master passcord for these things. Wh...

We just did 45 stories of leveling. Nope nothing quiker. Two people and a good set of radios is a must