Elevator Forum

If you don't have a rope gripper could be a dip switch setting. Or Possibly a brake poblem.. micros etd.. Last edited by Rolly; 09/02/20 08:03 PM.

They are very different, but identical for repacement, Should bolt right in. Think you can buy an AT 400 kit for about 3k, since the real black belt i...

Maybe Rope Gripper contact

ANTICREEP FAULT FIRST TIME ERROR: 50ANTICREEP IN FAULT ON 2 CONSECUTIVE DRIVES ERROR: 12

Montana think you have one on your laptop..

Glad you found it..

Let Me know if it is touchbuttons. If it is, most likey it is HJ LJ HS HG LG CBS. those are coils that have double windings, one for DC hold and an AC...

I asked if the "C" relay is out because if it was car may have tripped the ETS (Emergency Terminal Slowdown )via hoistway switch coming into top floor...

When you find the car is the "C" relay in or out?

They are used to direct Eproms to read certain area's or used on displays. The kone TMS 900 Memory board had 3 Bipolar proms and you have to have righ...

The Dallas Chip works for both, CPU40 and CPU561. I had to have a programmer that would program OTP Bipolar Proms like 74S188 open collector and tri s...

Which cpu board you using the CPU40 or the CPU561 that requires a kone sim card to load the board.software?

I use a Dallas Semiconductor Battery backed ram DS1245Y-70. They should be availiable. I use it in my eprom reader/burner also. I always save the file...

Do you have a print? If so what is the field designation on the print? Possibly GDF?

What does the tool service?