Elevator Forum

Looking through some notes now I question my above answer, I DONT have anything for 311 gem but to find that same parameter on other controllers they ...

M-2-3-7 go on until you see enable lsp type 0 = disabled 1 = disk brake 2 = rope gripper 3 = gov trip solenoid Last edited by MX4; 02/10/24 05:37 ...

I have a 1974 Dover hydro print send me your email

I can’t say I’ve seen both faults come on together, it’s saying the door contact. Check your relays and if you replace them make sure you pay attentio...

1096CDCF failure - This fault occurs when CDCF and CDCFM are in the same state.1098HDIF failure - This fault occurs when HDIF and HDIFM are in the sam...

EXPANDO will come apart but not easy, have your helper hit the coupling while you turn with wrench.

Fast turn around time on the board, what company?

EXPANDO! Follow EElevators instructions!

If your boss pays the extra money I believe Access will add sockets so you can just change the relays next time, a bit pricey from what I understand.

You can but you need F2K config to do it

I would love one also, is there any alternatives? I see someEchelon usb adapters etcJust getting my feet wet with TK Lon

Is this for TK Lon?

Thanks for the update!

POSSIBLE REASONSWiring mistake. Fuse from Power supply burnt. Board broken. LCEOPT or car LON network broken.PREFERRED ACTIONSCheck in LON network (en...

Bump