Elevator Forum

In my state the code says the location for log books and such must written in the firemans key box, they send out a red box to put all documents in so...

All of my 20s and 32s have never shutdown after setting to 30 seconds,

Should be in adjusments o29 set to 30

Whats your sync time?set it to max

To g24

Prsw i think on the din rail

Follow the 2 gray wires back from the tank to controller,on some i think they goto a din rail.

Did u look at the door operator?if the the state light is lit up then you need to do a door learn.

I dont know about your state but in mine nothing says you have to pick the load just stop it with the safties,and hold 125%.that doesnt fix them probl...

Jluff i sent u a pm

Should work i just plugged into a 32 and hit the 20 portion on ims and it works fine

Make sure z44 is set to 100,did you turn in on the up slow down? An 1/8 or 1/16 turn in will stop those early morning stall outs.also check leveling s...

Z44 must be set to 100 or 10 seconds!

I would measure the distance between the flower pots on the pistons to see how far there off,any more than 3 inches or so and id say you have a proble...

Hate to get off topic but the 1150 will get you if you dont have z44 set to 100,been burned on that one before and check all new jobs i get.