Elevator Forum

Originally Posted by Jluff Actually the circuit breaker still needs to be 125amp. FLA 78.2. So it requires 117.3 amp. nyc will allow for "under rate...

When you say 115amp service what are you referring to? You either have a 100amp or 200amp disconnect switch. What wire size is feeding the disconnect ...

Originally Posted by Flyballgov Has anyone seen the MCE computer become corrupt? Have a 3 bank and cannot access of the 3 via computer. It resets the ...

Them MCE HMC 1000 are great controllers. If you wanted to upgrade the elevators over time, I would save those for last (or honestly just keep them as ...

It is 100% an old Southeastern. I have (2) of them on my route. Unfortunately, no prints! I can tell you that 90% of the time the small shunt on the w...

World Electronics sells a replacement board that we used a few times and has worked perfectly. They will also repair it if you have the time (but they...

they are all trash. Just ADA compliant and not considered a "real elevator"I see custom elevator makes a small package that basically and ESI (elevato...

laser and a Plum-bob

BlainYou will need to determine the gallons per min (GPM) in order to purchase the correct rupture valve. Just because the pipe is 2" doesn’t mean you...

I have seen a few pins removed from the jack where you plug in the fast tool. Check that the pins didnt get pushed through or the wire removed to fool...

what type of pistons? It could be a packing issue if its a 2t or 3T jack. Did you check the valave strainers? What about the shoes? Maybe to much play...