Elevator Forum

You have to download a driver for it and change a setting in IMS but everything else is the same.

Echelon TP/FT-10 is the USB adapter. Uses the same cable.

PY is the old style like a DMC, no UIT. Newer TAC20’s came with PA boards or “UDC”

Software heaven I guess. I have the chips but the CPU wouldn’t boot with them after a “failed” generator test. I assume one of the 2 chips, FLASH or P...

Finally got the software from Adams and got this thing running today. From everything I’ve read, having an ASILOG A does make this thing a 400A, despi...

I think it does say DMC-II. It kind of is. I think that’s what the Tac20 was going to be called before Thyssen bought Dover. But you can do everything...

The CPU and I think the PMI cards use that 5v supply too. Make sure the card cage fan is working and ALL of your contactors have suppressors.

I think the Local channel is 50 ohms, not sure though. First make sure all your suppressors are in place on all your contactors and fans. Then I’d pro...

Has to be building power. You need to get a voltage monitor on it.

No you’re right, it has a floor table and sets the slowdown based on DTO digital target offset. You could try increasing this for diagnostic purposes ...

Schindler gets away with it

You can add PI_ I/Os and use a discreet CE driver board.

Order a NEW door board, should be a 6300PA6, a 6300HL1 UIT and the 6” ribbon cable part #9863295. You can do it without the ribbon cable but it makes ...

The prints will be on the stick too

SMLCD is lit but blank. It is the newer GCIO with just 1 removable chip. This car has an ASILOG A, our tech support told us that makes it a 400A but t...