Notifications
Clear all
Topic starter
26/01/2019 12:25 am
Hi All
Anyone here that have a copy of a NVRAM Dallas 1245Y on a Kone LCECPU 561, where the controller is locked after the 10000 starts?
It would much appreciated if someone would share the .BIN file.
/Alex
26/01/2019 6:01 am
Have never heard of Kone doing that? Where are you located?
Topic starter
26/01/2019 4:33 pm
Europe..
Kone has been locking LCE controllers since the first gen Monospace. (They remove the KNX board from the controller if they loose the service on the unit).
Kone has been locking LCE controllers since the first gen Monospace. (They remove the KNX board from the controller if they loose the service on the unit).
27/01/2019 1:04 am
Ahhhhhh, those sneaky fins. I doubt they'd get away with that here. The building owner would sue them. The building owns the equipment, i find it hard to believe that the building owners don't do that in Europe.
27/01/2019 4:22 am
Schindler gets away with it
27/01/2019 5:00 am
its my understanding that Kone owns the KNX cards, they are NOT sold as part of the original lift equipment, and that's how they get away with it.
28/01/2019 5:44 am
You cant use a file from another cpu. Send me your file i will patch it for you
29/01/2019 12:26 am
Has anyone tried on a locked unit logging in with laptop using the Kone Console program? It's quite complex. The password to get into high level stuff includes the floor the car is parked at, so it changes constantly.