Elevator Forum

Last time I did this, and it’s been a year or 2, the drives were coming with a software that isn’t compatible with the controller software in the US. ...

No 300As had an SMLCD like the 330A. 300As are much closer to an MPH2 and require the same HHT tool for diagnostics. It looks like a DMC FAST Tool but...

It’s probably worth while to try and reload the software but probably a bad CPU.

Don’t know this drive in particular but sounds like a reversed encoder. Can you swap A with A not?

It all depends on the type of memory used. DMCs are older technology that used volatile SRAM to store field adjustable parameters. Volatile means that...

Ya I’ve done it both ways too but a field engineer once told me to change a DMC battery with the power on (obviously) and change a Tac 20 battery with...

Change Tac20 batteries with power off. But well worth while to do a transfer download first either way Last edited by Indirtwetrust; 01/04/23 06:5...

After changing an IO or loading a new job you have to reload the job in IMS then close and re-open the IO map to see any changes. A JBD command in Rem...

Oh right, not required in CA yet

Go to about IMS and make sure it’s Office first. You don’t want to edit your registry if it isn’t going to work. And it’s a good idea to make a backup...

Do those have a line check function? The Rath phones have a feature that we have to turn off on ring down lines or they will do this intermittently. I...

Or if you know someone at TK, all service mechanics have access to the job files now. Just need your job #.

Just get the original job file from Vertical Express. You sure there isn’t a floppy disk on site?

Wow I’ve never seen IOs disappear before. Do you know that your IMS is capable of changing IOs? There were some versions that it didn’t work on. It's ...

Is it always on a down run? Does it do it every time or is it intermittent? MI+ and MI- should be 8.4vdc when not in either terminal. If it’s not, mak...