Elevator Forum

You need "F2K Config" + KM50300810G01 (https://partsview.konespares.com/Details?id=73727) or special "Key Switch" https://parts.kone.com/Products/KM80...

It could be that the COP has not been recognized correctly.→ Rel.2 (with SW V9.21): A learning travel has to bemade to recognize the COP. (Keep in min...

Pm me your email

Since the CTL switch is marked, it must also be in the IO list.Please look in the circuit diagram on the last pages for the IO list, search for CTL an...

sorry chip3, I overlooked it:7433 = Quad 2-input OR Gate

these are not microcontrollers but very simple "AND" logic gates TTL.7408 = Quad 2-Input AND gate DIP7411 = Triple 3-Input AND gate DIPhttps://www.fut...

On the picture it looks like the capacitor is cracked and the LM337 has contact with the capacitor.Please check! If so PCB faulty. Attachments V3F2...

Hi,the pcb´s seem to be the same.i'll send you a link with documents i have.Please do the commissioning troubleshooting according to the manual if nec...

https://www.smartrise.us/wp-content/uploads/2017/02/V2-Parameter-List.pdf

please check this setting:13-099.7Invert HC Lockouts When OFF (default), voltage on a hall callsecurity input tells the controller to allowcalls from ...

I do not have any versions of the invmon.

Do you have a "Null-Modem Adapter 9-pol", Pin 2->3 Pin 3->2 Pin5->5?Pins at a standard RS232 USB cable is not crossover.SW version of the V3F...

Originally Posted by TasElevator The lift doesn't have a leaky oil canister and doesn't have a scavenger line hooked up to the barb fitting on the bot...

yes, that is a problem.see the circuit diagram. Attachments Screenshot 2023-09-21 232823.jpg (129.3 KB, 30 downloads)

maybe this will help. Attachments Screenshot 2023-09-21 215221.jpg (42.76 KB, 43 downloads) Screenshot 2023-09-21 215301.jpg (77.98 KB, 28 downloa...