Elevator Forum

F16,8,4,1 ac voltage out of tolerenceFault occurs when incoming ac line voltage deviates by more than +15% or-20% of level specified in parameter 617 ...

I tried to edit new ones are available from kone spares or Adams .Its such a waste to use the foam when the buttons really never go bad foam just wear...

It's a 220 series button kone/ montgomery there junk foam wears out button no longer works you can take the foam off and glue two little washers in pl...

They use diiferent hydro oil as well take your time its not a quick process like a good oil fashioned repack

Has he check the m contactor I had one the m contactor wasn't falling all the way out after someone removed the cover there is a some piece on the cov...

You just have to have the line changed by the phone company to ring down to a line specific number thats how we do it here in the states

I only use the locking bar when checking the holding pressure of a single brake too make sure a single brake will hold the car if one brake fails ,I p...

Is this a four too one car ? Or I think they call it a Ohio car ?

Worm gear. Or the amd stuff ?

I think you need a Kone service tool and log into the lon network through the cop that should unlock the cpu

Is it a hydraulic elevator or a traction elevator ?

Are the power supplies getting replaced like for like?The oem ones I think are 28 amps The cheap replacements come at like 7 or 8 ampsWe found this to...

Resolve or Eco space? Is it a galvanized cabinet or brown resolve ?

Did it set the safties? If you jump the safety circuit and try to run with it on the safties it will fault because of the torque on the motor