Elevator Forum

Hope you get this resolved soon. On the drive….once a fault or warning flags, doesn’t it remain on the operators screen until you access it? You menti...

10 points to the tach error. Checked for broken/loose coupling? 64 points to rope gripper- this install has one?43 gate and lock opened in a speed fas...

Yep, Northern. Says that right at the top of the I/O Supply Board.You’ll find out if you don’t know, there’s a pass code to access the controller once...

I’d check with Gorman to see if they have an oversized packing expressly for this condition. Gorman also has a packing with a teflon ring in one seal ...

Originally Posted by Jluff Install maybe Thatta be my guess too. “INSTALL”.

I’ve done both. Adding Cat Oil to the tank and brushing it on the packing head or heads. Not sure how effective brushing is, but some things are worth...

Very nice. Now that you know how to post pictures, get your drone up in the air and let’s see the daytime aerial views!

Front and rear opening a few feet apart at the top floor(s).* So does this unit see a high speed demand from short floor to top (5 to 6)? *Is there a ...

So the DO circuitry is good. Could it be valve or packing? Is the slowdown into the top floor too long? Can it be shortened or quicken up LU or soft s...

You might be able to get say three reputable licensed repair companies to give you an estimate. Most likely based on time spent, but not exceed a $ nu...

“Curiosity killed the cat”.Sir, tinkering with any non functioning conveyance is not a task for the untrained. Unintended motion or quite simply getti...

Relays have been replaced…check.Have you peeked through the top hall doors to see just what the car is doing at door open zone? Is it above the floor ...

Not sure of the type of driving machine/pump you’re describing. Without a better understanding it’s tough to give a direction. By chance are you a cer...

Yeah this is a tough one. IIRC, that PAL fault has to do with a mismatch with Logic and Program. We had a unit that only on car top inspection, if you...

Quite the back story on this thread. So does the customer now pay the full bill? You guys lost a lot of $$$ on this one and you’ve got the evidence no...