Elevator Forum

Try Electrodyn 800-447-5442 the have added fire service to just about everything and will sell prints for about 100$ a set not a page as some of the O...

smitty sounds like you nailed it.Just for everyones knowledge the ICOMs on the car top mother board and main controller mother board are tied together...

If this only happens at night I would take a look at the viscosity control. Dover heats the oil by running the pump motor and bypassing the oil thru t...

J Sand was right on when he said that submersibles dont handel single-phasing very well building power problems or starter contact problems will take ...

As with almost everything in our buisness your motor runs on smoke and everyone that i have seen when the smoke comes out you need a new motor as ther...

Smitty is right on the money with the nylon pins. I have also fixed a lot of GAL,s with a few other simple tricks. With the power off hand crank the o...

Scott, their is nothing a few weeks fishing wont help. Good luck and I hope you have as much success as we are having here at the Lake of the ozarks!

Scott, I dont have a book handy but here are a few things that I have fixed over the years that cause this type problem. Change out your secondary con...

We found these parts THANKS

we did a 4 car group but we converted the 7660 cable drvie system. We averaged 2 days a car and when you do your first learn trip in the open you will...

Whenever we get a job with no prints I go to Electrodyn 1-800-447-5442 they have put fireservice on just about everything and you can get a copy for a...

Has anyone heard if MARTA released their findings at 30 day as promised?

Glad to have helped! I have only seen this once but somethings stick with you.

Scott have you replaced the Aux. contacts on the starters? Also make sure your valve is sized properly and you are not starting to move as soon as the...