Notifications

Clear all

Technical Questions

This is where you can ask a technical question about any equipment you are working on.

RSS

Page 41 / 549 Prev Next

330a ETSL error 97

Last post by Pjf79, 1 week ago

Posts: 4

I have an ETSL error 97 xtra 230919. I replaced th...

By jkh 2 years ago
It sounds like you’re getting a ground from the tr...

By Indirtwet... 2 years ago
Sorry I was thinking car at top landing for some r...

By Indirtwet... 2 years ago
Thank you IndirtwetrustETSL1 was functioning oppos...

By jkh 2 years ago

Thyssen POME tool

Last post by Pjf79, 1 week ago

Posts: 3

anyone know how i can active this POMe tool got it...

By KoneLiftE... 2 years ago
What controller is that for?

By Indirtwet... 2 years ago
https://test.hissmekano.com/product/16772

By Fehlerteu... 2 years ago

Schindler 3300 Testing Procedures

Last post by Pjf79, 1 week ago

Posts: 4

Does anyone have a recent version of Schindler's T...

By Local8Ele... 2 years ago
This is the only 3300 doc I have. I hope it helps....

By JJR 2 years ago
1. With car on normal...2. Go to 20 menu (test mod...

By Wrennegad... 2 years ago
Thx JJR I will compare notes.Ahhh...line 4 on my d...

By Local8Ele... 2 years ago

Otis Drawing 1-A257501C

Last post by Pjf79, 1 week ago

Posts: 3

Having an issue with this one that the door is not...

By solidstat... 2 years ago
Excellent description of the problem. This is a 10...

By mmill 2 years ago
Thanks. We had tested those capacitors and they we...

By solidstat... 2 years ago

DMC Selector board compatibility

Last post by Pjf79, 1 week ago

Posts: 4

Does anyone know if different selector board versi...

By RyeGuy 2 years ago
It's likely the board is bad right out of the box....

By lowoil 2 years ago
Interesting. Unfortunately vertical express doesn’...

By RyeGuy 2 years ago
CV3 boards are hit or miss. I’ve needed 3 brand ne...

By Indirtwet... 2 years ago

Icon Issue

Last post by Pjf79, 1 week ago

Posts: 5

Have a 188e replacement board back from repair whe...

By wltr00 2 years ago
In the first pic put in an area code, any will wor...

By Indirtwet... 2 years ago
So got the software loaded, but couldn’t do the ho...

By wltr00 2 years ago
You definitely will need to be able to run on insp...

By Indirtwet... 2 years ago
view all posts

3300 STM Replacement (Belt Monitor)

Last post by Pjf79, 1 week ago

Posts: 6

Does anyone have information on replacing a defect...

By Hex67 2 years ago
That’s what I’ve heard, it sounds like it might be...

By Hex67 2 years ago
All the belted units in California require somethi...

By Indirtwet... 2 years ago
Is there any documentation for these? OrAny recomm...

By Hex67 2 years ago
view all posts

Dover DMC Jack Synch Fault!! Help!

Last post by Pjf79, 1 week ago

Posts: 3

Got a Dover DMC-I, 3 stop, front and rear, dual po...

By GoingDown... 2 years ago
Ive dealt with this before, usually changing the s...

By EElevator 2 years ago
I have ordered 8 of the sensors and lenses. Will u...

By GoingDown... 2 years ago

Kone monospace

Last post by Pjf79, 1 week ago

Posts: 11

Hello. I have Kone Monospace elevators, manufactur...

By Vadim 2 years ago
We were using TK part number 9739981 but any 2 pol...

By Indirtwet... 2 years ago
Thank you for the detailed response. That’s a good...

By Vadim 2 years ago
If the power drops enough to drop out that relay I...

By Indirtwet... 2 years ago
view all posts

Otis 211 selector issue?

Last post by Pjf79, 1 week ago

Posts: 8

Hey yall,I have an Otis 211 that was having interm...

By mrob8705 2 years ago
I agree with EElevator. I don't think the valve is...

By Bowtiedro... 2 years ago
Hey everybody. Thanks for the replies. Turns out t...

By mrob8705 2 years ago
Ahhh good deal. Your week long headache is over. N...

By elmcannic 2 years ago
view all posts

Page 41 / 549 Prev Next

13 Forums
7,385 Topics
41 K Posts
3 Online
1 Members

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed