Notifications
Clear all
Topic starter
16/01/2019 6:42 am
Anybody know of how to get a hand held for a Millar CVT?
16/01/2019 8:05 am
which model ?
CVT Elon 1000 = Tricon (Othompson) now MCE
CVT 2400 = Series 90 (Othompson) Call MCE (series 90 has integrated display CVT 2400 use same boards with HandHeld and no display and board connectors are differents)
CVT Net = Ultra 2000 (Othompson ) no handheld
CVT (dont remember the Name) = Miconic A (Shindler) use a Shindler HHT
CVT Macroscan OLD no HandHeld use a Computer Terminal just HandHeld for the drive is GE OLD model
Last edited by NOTIME; 01/16/19 12:08 AM.
Topic starter
17/01/2019 8:33 am
Not real sure I don't know how to post pictures of the controller? It says CVT but I heard someone say they thought it was a Miconic?
18/01/2019 6:36 am
Same as Schindler Miconic A
buy a HHT
https:/
or World Electronics (real Expensive)
Topic starter
19/01/2019 6:20 am
Thank you!
08/07/2019 9:20 am
That picture is of a Schindler old name was epoch 2. Also Called a miconic a use Schindler h h t handheld also world electronics sells word tool s that works
08/07/2019 8:37 pm
There is a software program for laptop called HHT. Works great!!
12/07/2019 8:48 am
Your picture is Miconic A or possible Epoch2 VA.
Millar CVT used a rather strange keypad with three buttons on the side and then a grid in the front. Some people rigged up the old little Tandy computers as well. Millar CVT was basically an early version of Swift just laid out like a science fair project
Millar CVT used a rather strange keypad with three buttons on the side and then a grid in the front. Some people rigged up the old little Tandy computers as well. Millar CVT was basically an early version of Swift just laid out like a science fair project
Last edited by Smitty; 07/12/19 12:49 AM. Reason: Spell
24/07/2019 8:24 am
Do u know any password or logins for the cvt 8600
28/12/2019 6:30 am
Millar CVT 8600 hand held can be acquired through Bart Elevator in NYC. Works great.