Elevator Forum

The existing equipment is total junk. Do your customer a good deed and replace that scrap with reliable Brand name stuff.

The existing equipment is total junk. Do your customer a good deed and replace that scrap with reliable Brand name stuff.

In looking at the files, the communication EPROM can possibly be a 1 meg EPROM. The newer software has a 2 meg communication chip.

I won't give you software that has a potential for an accident or getting someone hurt. You being a board repair facility should have an EPROM program...

Sorry have to know the speed..are you an Elevator Tech and what country are you in?

Bad or intermittent micro switches on the brake. replace them.

Will look and see but I bet some Schindler guys have the answer in their head. Last edited by Rolly; 05/19/17 02:02 PM.

That is the software revision number.. Is it a geared or gearless? The A3 & A6 Boards in the drive determine how fast the car can go along with th...

Software is written for 1, 2, 4,or 8 Meters per second.1=up to 200 fpm2=up to 400 fpm4=up to 800 fpm8=up to 1600 fpm Last edited by Rolly; 05/13/17...

Will look today but I think I may have that software.. It is revision 1.0 What speed is this car?

Sent 2 files

Software versions must be same. Never seen one work properly with different software in cars in same group.

Send me a PM with email..

Get a better picture of chip labels and I will tell you if I have that software.

That is a standard TMS 600 CPU board. The top chip on the far right of the 3 is NVRAM. The next chip to the left is the RAM chip, The 3rd chip is the ...