Notifications
Clear all
Topic starter
23/05/2017 6:42 am
Couple Questions: I Have a Kone HS Hydro with a Oil Lift systems/GMV pump unit that lost a motor and possible pump.
1.There is no motor data tag indicating a frame number or RPMs anywhere on the job and spares doesn't stock them. I'll call OLS tomorrow but does anyone know if these motors are interchangeable with Imperial or US?
2. Thinking about trying to sell the customer a new pump unit with a more common maxton valve and common motor. The current OLS valve is set up with only 3 coils, but on the print it shows there is a jumper that can be changed depending on if you have a OLS valve or a maxton, as well as wiring terminals on the top board. Does anyone know if it is that simple to just move a jumper and add the extra wires for the maxton? Or is there something in the software that might have to be changed as well?
23/05/2017 9:40 am
The existing equipment is total junk. Do your customer a good deed and replace that scrap with reliable Brand name stuff.
23/05/2017 9:41 am
The existing equipment is total junk. Do your customer a good deed and replace that scrap with reliable Brand name stuff.