Elevator Forum

Check CAN H & CAN L at WDPNACheck 24v from semna You may have to access cartop so you can get to the drive and look at the light sequence on the d...

What drive?

Will need for information, on automatic we need a list of your I/Os etc.Need to find the fault causing the shutdown list all mcss ocss and drive

Usually the tablets have the newer software with more capabilities.

DSO means door safe to open. They should have a paper print to follow in the glide package

That is the work around, new software for compatibility with new Lon pbi board

Sent to your email

I’m across the pond so things may be a little different-Can you disable ado/acl to see if that fault goes away? Isolating the relay. Definitely check ...

Transformer is mounted in the controller because glide uses 240 vs at400 using 120 if I recall correctly.Great upgrade in my opinion!

The Nts switches are bistable switches, you can run a magnet across them to change the state (latching)Make sure your gap is 3/8” Make sure your magne...

Shows your jump points per plug

Have you reached out to Adam’s or Radwell?I know we have bought refurbished transformers in the past from them.

PM me your email

K442 Relay is de-energized for car to be on Inspection mode.Controlling the K442 Relay is by switches on the ground side of the circuit.K442:1 Relay i...

Do you have any more pictures? Higher quality the better you can upload to imgur