Elevator Forum

I had a hydro do this on jack resync ... software issue

How do you get an up direction after you remove wire from INB?

I had this once on a DMC. . It was bad capacitor under door controller But it was intermittent Last edited by Jluff; 12/26/21 12:29 PM.

Vertical express told me the Same. 9723215 TELE.JACK CHECK VALVE On back order Gorman sells the check valves ?

Well I Used a spare shielded cable to swap out rsl wiring to COP board and still no good. Tomorrow I’m using some spare wires to take the 30vdc right ...

If I can get the car station board to work in my hand in the machine room with out ring board in play then I must not need it

In the cop the comm wires also go to top of car to ring board. Unplugged it and still no comm to car station board. Does the ring board need to be con...

Changed oil and seals And the hard release didn’t go away . Cleaned pistons and added 1 gallon of max glide into jack and one gallon into tank and the...

Is Maxglide different then the soft stop additive. Adams sells a soft stop additive. But I was under the impression Maxglide was different