Elevator Forum

Look in you PMs...

Look in the COP

I would imagine if what you are trying to develope doesn't conflict with EMR, they may have what you are looking for.[email protected]

Try the followingLindenValve repair (800)769-5438EMI valve (847)593-4900Vertical Express (Dover, TKE) (866)558-3789

E,Do you have a service tool?

CB,It's sounds like oil is bleeding through your up pilot piston for the pressure to build in the regulator piston allowing oil to flow to the jack.Di...

E,I'll gladly take the abuse. We made it home safe & tan.I'll say it was tough stepping off the plane to single diget tempatures! A harsh reality ...

As elevator mechanic (big or small companies), We repair elevator equipment everyday. I'm hopeful that "as mechanics" we make good choices. But I also...

Jed,Your profile says your a project executive. Im not sure how we can help you? The safety edge has a very basic function. When something blocks the ...

I'm just woundering is there any DS LEDs on? Is the burden resistor loose on the feedback board? TB-1(1), TB-1(3) loose? Is #80=6?

NOTIME.A friend of mine would describe this questionable infraction as "we are slipping on the ice"...Kiwi is looking out in the best interest of the ...

I've never had to convert one. Although I have some that are set up with the Yaskawa G3 drive. If you would like, I'll send you a 4 stop print and any...

GoogleThere is a YouTube video...Machine maintenance Holister-Whitney elevator machineI also wanted to mention, most motor shops I've delt with have a...

Please bare with me, my knowledge and experience with miproms are limited.John Jay brings up a valid point. Not knowing which drive is being utilized ...