Elevator Forum

Putting Otis GEN2 o...
 
Notifications
Clear all

Putting Otis GEN2 on safeties

19 Posts
10 Users
0 Reactions
35.2 K Views
(@elev-te79)
Estimable Member
Joined: 17 years ago
Posts: 116
Topic starter   [#13475]
Can anyone explained to me the procedure step by step on how to put Otis Gen2's on safeties and how to take them off ? Thanks in advance



   
Quote
(@elev-te79)
Estimable Member
Joined: 17 years ago
Posts: 116

   
ReplyQuote
(@newmech)
Estimable Member
Joined: 17 years ago
Posts: 203

   
ReplyQuote
(@billvator)
Estimable Member
Joined: 17 years ago
Posts: 93

   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904

   
ReplyQuote
 MSS
(@mss)
Active Member
Joined: 17 years ago
Posts: 8

   
ReplyQuote
(@elev-te79)
Estimable Member
Joined: 17 years ago
Posts: 116

   
ReplyQuote
(@solidstate)
Prominent Member
Joined: 17 years ago
Posts: 643
 
will the original tool from otis for the 211's work on the Gen 2's?

We have that tool but do not have the Gen 2 yet on service.



   
ReplyQuote
(@billvator)
Estimable Member
Joined: 17 years ago
Posts: 93

   
ReplyQuote
(@vatorgator)
Honorable Member
Joined: 17 years ago
Posts: 432
 
solid state, there is a tool available from china that will work on the newer gcs controllers. have bought and tested a couple. a little over 200 bucks. i only tested it on a Regen controller, but it did give access to all the menus not sure about the new gen2 but i believe all the newer stuff is GCS. maybe some otis guys can weigh in on this

Last edited by Vatorgator; 03/06/15 05:24 AM.


   
ReplyQuote
(@elev-te79)
Estimable Member
Joined: 17 years ago
Posts: 116

   
ReplyQuote
(@newmech)
Estimable Member
Joined: 17 years ago
Posts: 203

   
ReplyQuote
(@rolly)
Honorable Member
Joined: 17 years ago
Posts: 729
 
FYI you can trip the gov and reset without a tool. Look at what the tool does on the print and you can do it with a switch box hooked to the I/O that trips and resets the gov.



   
ReplyQuote
(@vatorgator)
Honorable Member
Joined: 17 years ago
Posts: 432
 
got it from jufengelevator.com .
yes they really do work on the GCS. you can order and pay with pay pal. can't go wrong for the price. here is the one your want GAA21750AK3 USD190

Last edited by Vatorgator; 03/11/15 03:54 AM.


   
ReplyQuote
(@elev-te79)
Estimable Member
Joined: 17 years ago
Posts: 116

   
ReplyQuote
Page 1 / 2
Share:
Scroll to Top