Elevator Forum

I’ve gotten by up til now without a tool but I always want the tool!

You can still get that thing?

Probably DOL 1 or PP contact 3. The contacts are numbered on the back of the base and they say Make on one side & brake on the other. Just need so...

I’ll send you some stuff. They are very similar to US, just a little bit more solid state.Simplex, duplex, stops, F&R??

H Relay Hydro??

Excellent, thank you. I have the drive software and loader. Then it should transfer parameters automatically after a double reboot?

Go by the faults now, make sure the CWI is on line, DCN. And check your car I/O are in the right state.

Thyssen will sell you the software. To use a config from a different car it would have to be identical.

Is it a Hydro or traction?

It means you have to move the jumper or the switch on the ADON board and cycle power to change that parameter.

I have Oil Level Low In Tank or Releveling too fast for traction products. K486 relay drops while car is leveling with doors open. Last edited by I...

Maybe Esco

Are you saying you could get it to work with a USB to 232 adapter and the Orange Cord? I didn’t think that would work. I just tried a Tripp-lite USB t...

This is an interesting problem though. I’d like to try to get DMC1 Fast to work on a VM with a USB adapter too. Has anyone got this to work? I’m tryin...