Elevator Forum

Depends on what you need.Are you replacing a new one or does it just need recalibrating.If you have access to the mcss via some sort of tool,sometimes...

Ends up being an issue with software and the door detector .So it would seem to be a safety issue. Also,they are not giving any hours for it.30 minute...

The real reason I ask is because during re-opening when the detector is activated,it is very sluggish and sometimes times out before getting fully ope...

Something wrong with the drive settings concerning the motor?

Ditto.We need your card and verification.😉

Yep,it was the traveling cable.A spot had gotten worn in it from hitting the divider beam and occasionally causing LU and DZ to go active briefly.

On some advice,I replaced an encoder and the MLB board.Still same problem.Will look into a possible T.C. problem.The job is only 6 years old,but still...

Could it be that in the past it lost it's info and someone made some changes to the program that didn't include the top floor?Hoistway learn run might...

Anyway we had a generator that would keep grounding out, and the company instead of pulling the genreator just sent the mechanic up with a gallon pump...

Funny story to add to this.My buddy decided he would clean the motor brush rigging and all with contact cleaner.Well,he didn't let the cleaner dry lon...

I know all you green pants out there are scared to death on commenting on this,it got me in trouble in the past.But I don't think pm's can be hacked i...

Hopefully the companies will inform you of your local codes for existing elevators.Things change when you upgrade,or mod the elevator.Here are the ,I ...