Elevator Forum

The elevator control received signals from the hoistwayinformation system which aren't signals of the expectedhoistway information system type.C1:Wiri...

hi, error code during synhronisation ???

Wiz, check errorlist Error Codes until SW V.4.2 (EN627) Turn DIP switch 5 on SCIC PCB ON Error Codes from SW V.4.4 Turn DIP switch 4 on SCIC PCB on ...

HiIn case of mechanikal push buttons, it is necessary to open COP and make a configuration with the buttons inside COP.Br

do double reset and try again.1. DIP switch 8 = ON (on SCIC)2. Press reset (on SCIC)3. After the application startup (LEDs blinking) wait 30 s and set...

I would be very pleased if you could provide me the activation code for CADI GCIf you need any manuals related to Schindler contact me.Br

E_SAFETY_DEVICE_CAR_UNINTENDED_MOVEMENTA elevator safety device has detected that the car hasperformed a uncontrolled movement (e.g left the door zone...

No operation due to invalid configuration dataThe elevator is blocked because the elevator control detectedinvalid configuration data, for example SIM...

try checkibg SCPU connections or replace SCPU.br

CADI 3.10 works well on bionic 7. For review VVVF drive is better to use VACON keypad. However the faults described relate to contaktor feedback. It m...

put some weights from counterweight to car top.

HI,-Activate menu 10-Choose submenu 116-change (116 0) to 116 1)learning trawel starts.exit menu 116

hi,status 98: elevator is blocked folloving a fatal error reset of fatal errors of control and inverterhow to solve:1. on user interface choose10 and ...