Elevator Forum

Do you mean the Varidor 35 door machine? (not sure about the "dde"?)

Do you know what kind error codes the RPI Drive sets in the error log?Maybe some info from the MHC event list on the E.Cor controller...

Use a NO key switch for JDE, It must be connected to the LOP XBIO.1 and XBIO.4.Set JDE Key switch in NO position.Do a LOP configuration CF=00 LE="The ...

I wish my customers were so patient 😉

Drop me a pm with your email....

Depends on the model, 3 vanes or encoder position system.You could have a look a the parameters "Tipo_Plant" there is one parameter for each floor.In ...

This is from my fault list, if it helps?121 Switch Mismatch FaultExtrainfo =•0x0000065 Mismatch of JREC input with the car on inspection. If version 3...

Europe..Kone has been locking LCE controllers since the first gen Monospace. (They remove the KNX board from the controller if they loose the service ...

Originally Posted by Nikic Originally Posted by Alex75 From the picture it looks like a Schindler Smart MRL?In that case you dont have a DOD PCB where...

From the picture it looks like a Schindler Smart MRL?In that case you dont have a DOD PCB where you can choose your type of door machine. So I think I...

10 Poles...

I have seen the very early belts from 2000 with vertical markings on the belts (and some years after than with markings like an arrow).The new ones ar...

The type of RBI depends on the age and model of the lift, there are 2 versions out there. One Blue (old version) and a black (new version).Normaly the...

Fault on RBI (Belt monitoring device)./Alex