Notifications
Clear all
07/09/2015 11:57 pm
Not really off topic, but I think it's great to see the forum reaching across the globe. Experience from distant places from "home" blazing across the internet bringing help to whomever needs it on a variety of equipment.
Thanks everyone for your input over the years, it great to see!
Thanks everyone for your input over the years, it great to see!
26/05/2016 2:22 pm
E85 this mean R5SC always on , you can solve by checking 48 volt , and input output buffer of R5SC , some time feed back ground appear as 48 volt , ground source from main boared DOC ..
Last edited by fadi; 05/26/16 06:26 AM.
14/07/2016 1:24 pm
Hi
My lift is showing error 55-94 it bombs out as soon as relay C1ST and C2ST attempt to pull in.
it does not move at all.
My lift is showing error 55-94 it bombs out as soon as relay C1ST and C2ST attempt to pull in.
it does not move at all.
03/08/2016 4:16 am
Hi
I have a Sigma Si210 having an error E095-91 wich randomly appears.
making some research i have found is a r5sx related failure, still need the manuals, does somebody have these manuals in PDF?
I have a Sigma Si210 having an error E095-91 wich randomly appears.
making some research i have found is a r5sx related failure, still need the manuals, does somebody have these manuals in PDF?
03/10/2016 3:59 pm
Dear aLL;
we have 2 sigma elevators, one is not working for so long,we are trying to solve the problem, it gives us
so many error codes( E171-90 000 00s,E053-91, E032-91), and we don't have the manual, I am wondering if you guys can help us. I am also looking for some one who can travel to addis ababa, ethiopia to fix our elevator, one with a good knowledge of fixing elevator
best regards
Fikadu
+251-911-175303
we have 2 sigma elevators, one is not working for so long,we are trying to solve the problem, it gives us
so many error codes( E171-90 000 00s,E053-91, E032-91), and we don't have the manual, I am wondering if you guys can help us. I am also looking for some one who can travel to addis ababa, ethiopia to fix our elevator, one with a good knowledge of fixing elevator
best regards
Fikadu
+251-911-175303
Topic starter
04/10/2016 1:20 pm
E171: usual synchronous position error. To prevent such problem as door zone not detected because of non-corresponding synchronous position by rotary encoder
E32: INV U-phase IGBT Error( 180-420m/min). When U-phase +IGBT and -IGBT are turned on simultaneously, or when IGBT driving
power has failed or INV output(U, V, W) is short
E53: INV Charge Error
E32: INV U-phase IGBT Error( 180-420m/min). When U-phase +IGBT and -IGBT are turned on simultaneously, or when IGBT driving
power has failed or INV output(U, V, W) is short
E53: INV Charge Error
04/10/2016 2:00 pm
Dear Kenelev;
thank you I really appreciate your help, infact am looking for some to come to ethiopia( east africa), and help me to fix the elevator. Do you think you can help me?, my email: [email protected] or [email protected] my number:+251911-175303
best regards
Fikadu
thank you I really appreciate your help, infact am looking for some to come to ethiopia( east africa), and help me to fix the elevator. Do you think you can help me?, my email: [email protected] or [email protected] my number:+251911-175303
best regards
Fikadu
04/10/2016 2:01 pm
Please I need manual for sigma elevator
Topic starter
05/10/2016 11:15 am
Sorry fikir123, ethiopia is a bit too far form me.
And I don't have the complete manual either only the fault chart.
But by looking @ the faults. Look like u have the dive problem.
IGBT may be shorting out. Send out the drive to have it check out.
And I don't have the complete manual either only the fault chart.
But by looking @ the faults. Look like u have the dive problem.
IGBT may be shorting out. Send out the drive to have it check out.
05/10/2016 1:35 pm
Thanks for your help Kenelev,i really appreciate, but do you know anyone who can come and fix it for us( a good elevator technician) and if you dont mind, can you send me the fault chart?, thank you once again.
best regards
Fikadu
best regards
Fikadu
Topic starter
06/10/2016 9:45 am
check your PM
06/10/2016 7:13 pm
Dear Kenelev;
thanks...there is nothing in my PM
regards
Fikadu
thanks...there is nothing in my PM
regards
Fikadu
Topic starter
07/10/2016 5:40 am
Sorry, I mean email.
07/10/2016 1:27 pm
Dear Kenelev;
there is nothing in my email as well
fikadu
there is nothing in my email as well
fikadu
Topic starter
08/10/2016 10:38 am
re-send again. Check your spam also.