Elevator Forum

Notifications
Clear all

mce

6 Posts
5 Users
0 Reactions
10.3 K Views
(@derick)
Eminent Member
Joined: 17 years ago
Posts: 31
Topic starter   [#13646]
Anybody had a MCE lose the rudedncey safe check in flight and not reset just tries to resest the system but never sometimes it will get a emergency brake flt but no emergency brake



   
Quote
(@newmech)
Estimable Member
Joined: 17 years ago
Posts: 203
 
Flaky governor switch. Put a trap relay across the overspeed switch. Could be an encoder or brake issue also, the controller might think it is overspeeding.

Last edited by NewMech; 03/13/15 03:18 AM.


   
ReplyQuote
(@derick)
Eminent Member
Joined: 17 years ago
Posts: 31
Topic starter  
yes thought of that we ruled out a safety circuit on the car and machine room thinking it may be a ribbon cable or bad board we also changed relays in controller



   
ReplyQuote
(@j-sand)
Estimable Member
Joined: 17 years ago
Posts: 100
 
check supply power for dips. Also check you traveler for cuts. As it passes whatever has damaged it, you can hit a fast ground (and not blow the fuse due to length of time and wire) and drop voltage to a level that causes you misery.



   
ReplyQuote
(@local-yocal)
Trusted Member
Joined: 17 years ago
Posts: 48
 
I had a similar issue. Started happening every once in awhile then about everyday. I replaced the power supply in the controller and it never happened again.



   
ReplyQuote
(@billvator)
Estimable Member
Joined: 17 years ago
Posts: 93
 
i had some odd stuff going on and a MCE tech. told me to flip the ribbon cables!!! oddly enough i never had another callback on that unit.



   
ReplyQuote
Share:
Scroll to Top