Notifications
Clear all
Topic starter
27/11/2017 11:34 pm
Hey everyone,
When lift goes downward direction left brake apply late whereas lift goes upward direction right brake apply late.
May anyone guide me ??
When lift goes downward direction left brake apply late whereas lift goes upward direction right brake apply late.
May anyone guide me ??
28/11/2017 3:30 am
Sorry I am in USA. One brake is used for Emergency Brake and does not normally drop until goes to sleep. Other Brake picks and drops with runs. Make sure you do not have a magnetic residual issue (Metal touching that shouldn't).
Topic starter
30/11/2017 2:53 am
Hey Rolly,
thank you, your advised but there is no any magnetic residual. will you advice any thing else?
thank you, your advised but there is no any magnetic residual. will you advice any thing else?
30/11/2017 5:50 am
Check the Parameters. What version of software you have and which CPU, 561 or 40?
Topic starter
30/11/2017 12:28 pm
Hey roll,
Software version is 3.19
CPU 40. Kindly advise me
Software version is 3.19
CPU 40. Kindly advise me
01/12/2017 1:07 am
OMG 3.19 is soooo old you could have many problems if that is in the cpu. Need at least 6.7.25 What country are you in?
Topic starter
01/12/2017 11:28 pm
Hahaha, yes this is very old version in Pakistan but kindly advise me solution
02/12/2017 7:22 am
Upgrade all lifts software..
Topic starter
03/12/2017 1:36 am
how it can be?
06/12/2017 9:34 am
Rolly
I think he’s talking about the KDL16s software 3.19 which is fairly new. On the other hand,
CPU SOFTWARE under 6.7.25 won’t work with KDL16s anyways.
He’s probably referring to menu 6-97 which refers to drive software.
At least I hope he is lol
I think he’s talking about the KDL16s software 3.19 which is fairly new. On the other hand,
CPU SOFTWARE under 6.7.25 won’t work with KDL16s anyways.
He’s probably referring to menu 6-97 which refers to drive software.
At least I hope he is lol
06/12/2017 9:36 am
What’s parameter 5-9-?
06/12/2017 10:06 am
Could be, don't even know what country he is in.
Topic starter
20/12/2017 12:41 pm
Dear everyone,
i hope, you all are happy. lift is not floor level on EBD but when lift is on floor level then door will open. fault occurs 0105, 0213. kindly advice me what can be happen.
i hope, you all are happy. lift is not floor level on EBD but when lift is on floor level then door will open. fault occurs 0105, 0213. kindly advice me what can be happen.
21/12/2017 2:08 am
0105 is power supply problem and or braking resistor broken and fault 0213 is no floor nodes found (probably linked to power supply problems).
23/12/2017 1:06 pm
Dear all who have a idea for kone MX 18 model . We can’t start generator power because error 213 showed.
Page 1 / 2
Next