Notifications
Clear all
Topic starter
22/08/2019 9:46 pm
Hello. I need gov trip reset instructions with service tool. Lost paperwork.
Topic starter
23/08/2019 3:36 am
Also need jumping points for OS and Governor for Gen 2.
23/08/2019 8:00 am
Guys, the service tool just turns on an output to energize a solenoid to reset Gov. You can do it with a jumper.
Topic starter
23/08/2019 6:53 pm
What are the jumping points ?
23/08/2019 7:54 pm
Duh! Read the print..
23/08/2019 8:43 pm
Hopefully they left that behind.
Topic starter
23/08/2019 9:30 pm
Thereβs no print. Just an owners manual that is garbage pretty much
Last edited by Jluff; 08/23/19 01:30 PM.
24/08/2019 5:26 am
If you don't have a print you do not belong working on that equipment. After watching the video of what happened in NYC I would stress this.
https://nypost.com/2019/08/22/video...
24/08/2019 5:47 am
Fellow technicians should not be removing the prints off the job to begin with 😒
24/08/2019 5:51 am
very much agreed. the time of poking around and randomly looking for terminal points is over, especially with gen2 and other fully solid state controllers. too much can go wrong and theres too much risk. just call for your adjuster if you are not familiar with the equipment at hand.
Topic starter
24/08/2019 8:57 pm
Iβm not poking around. I have been in the business for 30 years . The prints were taking off job. As well as testing procedures that include the gov trip reset.
25/08/2019 12:57 am
Ok then post a wiring diagram number and maybe you can get a set of prints. Asking for terminals to use is absurd without knowing wiring diagram number. After 30 years you should know that.
26/08/2019 7:36 pm
ANSI code requires that testing procedures and wiring drawings are required to be accessible to the technician. Have the superintendent or sales contact the customer/owner.
27/08/2019 4:35 am
A Gen 2 has a set reset button that is activated by the tool. You will find gov set and reset command on tool and when enabled you push the set reset button on controller
27/08/2019 9:31 am
Bill Hempel, we all know that it can be done with a tool but you can energize the Gov Reset Solonoid WITHOUT a tool and reset the Gov.
Page 1 / 2
Next