Notifications
Clear all
27/06/2020 11:24 am
The crosshead data tag is a data tag located on the crosshead. It is very dangerous working around elevator equipment if you are not properly trained. I would recommend calling a local elevator service company to help you find some prints for it. Once you have your prints you should make copies for your filing cabinet. Without prints you might find yourself out of compliance with the state or with an elevator that can't be serviced, repaired, or tested efficiently.
29/06/2020 8:36 am
Thyssenkrupp has been servicing the unit for many years. They have said no prints are available, but they will make a set for $5500!
In our current financial situation, that would create a major hardship.
In our current financial situation, that would create a major hardship.
30/06/2020 2:30 am
That’s too bad, they were Dover. If you just want a set for the machine room so they can’t tell you they can’t work on it, post a couple pics of the controller.
30/06/2020 9:42 am
Here's a couple of pictures:
https://drive.google.com/file/d/1TTqsG1GpgT0I_FkmiflZx_Pd1lmaIK6-/view?usp=sharing
https://drive.google.com/file/d/1uPY0hS4Ot-7gXNaDs6_-1ygrm_MVwEEB/view?usp=sharing
https:/
https:/
You may have to copy and paste the picture links, but they should open up.
Thanks,
Bill
30/06/2020 10:41 am
The picture is a Westinghouse relay logic 4 landing hydraulic control. You should see a metal tag with a GO#. That is the number you will need to obtain the prints. It is possible ADAMS Elevator has the file. Adams is 800-929-9247. Tell them you are looking for electrical drawings for a Westinghouse Elevator Hydraulic Control. Or call your local Schindler office and see if they can help. Schindler purchased Westinghouse Elevator
30/06/2020 11:10 am
Thank you. I don't see a metal tag except for the one on the Hydraulic unit, and I don't see any GO# on it. I'll give Adams a call to see if they can help.
Thank you,
Bill
Thank you,
Bill
01/07/2020 12:37 am
Ya, I second that. The prints will cost you but not near as much as a mod
Page 2 / 2
Prev