Elevator Forum

Check the plug on the bottom left of the LVIB. It has red and black wires. If it's plugged in on the board, open the drive and make sure it's plugged ...

Won't reset from the keyswitch or from the service tool? Do you have a fire panel keyswitch or a remote fire service keyswitch? Check for that input?

Yes definitely check your magnets. 211s are notorious for magnets moving. After checking them you may want to go around the edges with some clear sili...

Sounds like the brake lifting and dropping.

Check the stall time. It should be set to 45 seconds for a normal floor height. If it has longer floors try increasing it. Also is the recycler workin...

Canada. Did you find the problem or still fighting it? Hopefully you found it! Some dcss and lwcss comm timeouts and errors are normal on 411,311 and ...

Look in the cpu input for gnp. That is the normal power input. If it is low, try unplugging the hall link then the car link then the group link to see...

I agree with the no literature. Then you get it on service and your supposed to know how to fix it but you can't even find out what the fault is.

I will start with this. If you are a union shop, there is no such thing as a second man. The companies can't make you have one. Period, it's not in th...

have you checked your access length parameter and your cab height parameters? I believe they are in the mcss.

Did you change the parameter to tell the board that it discrete or serial link?If the part numbers on replacement board are the same no buffer board w...

Check the jumper configuration on the I motion board. Also the new board will require a communication buffer board. Last edited by Magic smoke; 11...

A buddy of mine works for the big O and he bought one. He said it works fine. The dongle works on the later GCS. He said the software on the first GCS...

Service dept. The 2 am callbacks and watching the sun come up. I hate it when I see that fireball crest the horizon from a rooftop working on some dam...

Heat shrink is a good idea. I wrap the ends with orange electrical tape. Makes for a softer bite pad. Haha. Also the orange won't leave the black tape...