Elevator Forum

Originally Posted by Jluff Hello. I got an ESI controller that has a HD-LM Thyssen Krupp door controller. It has a 6300 PA 4 board and a UIT mounted o...

Originally Posted by solidstate Dmc selector and tree switches. Starting intermittently running on to stop ring. Start with the usual suspect of switc...

In NYC it is required. The change comes from RCNY 3610-05 and in 2018 adds a new section of ASME A17.1 Section 2.16.10 And this is what requires "Det...

so much of the Schindler parts are proprietary that you basically need to replace everything. Buttons are software based with LON so will need to be r...

I don't like them for 2 major reasons. 1st is software. IF you have software issues getting it resolved can be difficult and time consuming. However, ...

Originally Posted by ABE I am familiar with adding the relay in the COP but I was hoping to do it a little cleaner if possible through an I/O. Call ...

Originally Posted by Jluff I’m getting mixed answers in the field if sanding pistons to solve stuck pistons on take off is good idea. We get a hard re...

Originally Posted by ABE I have MCE HMC-2000 that the customer wants to add a single floor car lock out on. It looks like all the COP buttons and key ...

Originally Posted by Jluff Had building power problems. Wheh I showed up fuse F 10 was blown. (Print shows goes to car serial link ). After replacing ...

What is the drawing number on the cover to the contoller. "Wiring Diagram Number"

Originally Posted by djenergy THE releveling is in first floor ? if yes maybe you need adjust low pressure adjustment how do you know the seals are g...

Originally Posted by ABE I would double check the tank for a data tag as many do use a different type of oil that is does not mix with aw32. I don't r...

I thought about that to as water will evap quickly in a warm tank.