Elevator Forum

U8/U9 chips are interchangeable if the # on the chip is the same. There is no memory or program on them, they act only as "switches" so to speak, gate...

repairmanUZ, yes it is possible. Get an elevator company to do it.

Jumper was on A-B, looks like a battery. Thanks all.

Thanks NOTIME, will check and let you know. PGL, thanks for place and part#

Just PMed you

It depends on capacity, speed, accesibility of elevator with weights. If the annual wasn't done then that will have to be done also, as the tests chec...

There are retrofit kits available from Vertex. Highly suggest that you do this. Only if you can pull the armature pin out of the plate. That pin can h...

The 45 Fault is a bad contact ON the door board itself. To get rid of it you need to get new door board,or take the load off of them by adding an AUX ...

I've got 4 GAL Traction,3 MCE pre 2K, 9 post 2K, and 2 MCE hydros. Tech support for both are good, MCE you'll need a confimation # so you'll be billed...

If you turn on card reader option the CR's could be jumped high. Would that do it?

Re-read it, you did mention 211.

OCCS parameter SAR-DR 0=Park withboth doors closed,1=Park with front door open,2=Park with rear door open,3=Park with both doors open. This is assumin...

You never mentioned if there was a load on the car or not. if any load, and if it has load weighing or not, most of them do. Check ECD,FCD contacts, (...